XingTai will introduce 5 excellent Hvls fans for your reference, if you need anything, please contact us immediately!
16ft 18ft 20ft 24ft big hvls fan
Advantages:
1. Permanent magnet synchronous motor, permanent magnet synchronous motor can be installed on the wheel shaft as a whole, forming an overall direct drive system, that is, a wheel shaft is a drive unit, eliminating a gear box, completely sealed, truly maintenance-free.
2.Large air volume coverage range, the use of aerodynamic principles and advanced technology streamlined ultra-long fan blade, to transport a large amount of air, so as to form a 3-10ft air layer on the ground, bringing large air volume coverage
3.High efficiency motor, The HVLS fan has an efficiency of 84% within the Speed range, especially under 70% of the highest speed load the motor efficiency can be achieved 90%;
Large HVLS Industrial Ceiling Fan for Warehouse
Advantages:
1.The use of air conditioning with fans can save electricity by more than 30%, and indoor air circulation is limited. The use of air conditioning with industrial fans can accelerate the cooling effect of indoor air flow, reduce the running time of air conditioning units, and greatly save electricity.
2.Servo drive controller, with frequency control system, speed 20-65rpm, just need to rotate the speed control button, can meet the requirements of different wind conditions.
3.Special design of motor temperature controls ,when fan Motor temperature controlling, once the motor temp are higher than the set data, controller will slow down the motor speed automative, when it cool down, it will go back the set speed.
16-3/4Ft HVLS 5 Aluminum Blade Industrial Large Ceiling Fan
1. Industrial HVLS Ceiling Fan with 6 Blades
2. Big Ceiling Fan with Voltage: 220/380 volts, 3 phase,50/60HZ
3. Available Sizes (Diameter): 24ft
4. Air volume: 15500m3/min
5. Permanent magnet synchronous motor used, free of maintenance
6. Controller controls motor temperature
18ft HVLS 5 Aluminum Blade Industrial Large Ceiling Fan
Advantages:
1. Permanent magnet synchronous motor
PMSM can be installed on the wheel shaft as a whole, forming an overall direct drive system, that is, a wheel shaft is a drive unit, eliminating a gearbox, completely sealed, and truly maintenance-free.
2. Servo controller with temperature control
A specially designed servo controller, using an advanced full digital motor control algorithm, built-in over voltage, over current, overload, and short circuit protection, can read the real-time fan motor temperature and control the motor running in a safe temperature range.
3. Safety design
Adopt more than 10 safety protection measures (safety rope, safety ring, anti-drop bushing technology, type I fan blade link, top 12.9 grade fastener, anti-loose fastener, fan blade strengthening design, enhanced plug-in design, overload protection of control system, etc.)
20ft HVLS 5 Aluminum Blade Industrial Large Ceiling Fan
Advantages:
Low Speed: HVLS fans operate at low rotational speeds, typically between 30 to 100 revolutions per minute (RPM), as compared to traditional fans that rotate much faster. This slow rotation minimizes energy consumption and noise while maximizing air movement.
Efficiency: HVLS fans are designed for energy efficiency. They can circulate a large volume of air at a slow speed, requiring less power than multiple smaller fans operating at higher speeds.
Coverage Area: These fans are suitable for spaces with high ceilings, such as warehouses, factories, gyms, airports, and large retail stores. They can cover a wide area with their airflow, making them ideal for spaces where uniform temperature and air distribution are important.
Air Movement: HVLS fans create a gentle and consistent breeze throughout the space. This helps regulate temperature, reduce humidity, and eliminate stagnant air pockets, leading to improved comfort for occupants.
